Ways to build beautiful townhouses – Save costs

How to build a townhouse to save money – Something that not everyone knows

Anyone who builds a townhouse wants to be able to minimize house construction costs. But this is not easy, if you want to build a low-cost townhouse, it is very easy, just use cheap materials or unprofessional construction contractors,… but want to build a beautiful, quality townhouse Guaranteed reputation but still reducing costs is the difficult thing. Today, Nhan Dat Construction – A construction contractor with 9 years of experience in the construction of houses and townhouses will tell you ways to build a house to save construction costs without affecting the quality of construction. home.

Choose a favorable land to build a house.

There are reasons why land selection is important in affecting the cost of building a townhouse.

You should buy loam soil to avoid buying pieces of clay, sandy soil, loose soil, weak soil strata, areas prone to flooding, near underground water or prone to landslides, subsidence, etc. Because of these weak soils, When building a townhouse, it is required to reinforce the foundation to ensure the stability of the house, and strengthening the foundation often costs a lot of money. Another note when building a house’s foundation, you should invest for future needs. When building more rooms or floors, you don’t have to redo the foundation again.

The ground must be higher than the road level. If you buy lower ground, you may have to spend some money on raising the ground to avoid flooding when the rainy season comes.

Especially, you should not buy houses in small alleys under 1m, where only a motorbike can fit. This is considered an unfavorable construction condition, because the ability to transport and gather materials causes construction costs to increase due to too much labor.

Another factor when buying land to build a townhouse is the drainage system in that area. If there is already a drainage system there, you do not have to spend extra money on sewers and water pipes.

Knowledge of construction design

Learn basic knowledge about construction to have a specific construction design plan, manage house construction costs effectively to avoid additional costs, understand legal documentation procedures, know the procedures Construction permit application procedures, construction start notification procedures, and experience in building townhouses to avoid unexpected costs.

The house construction area is sufficient according to needs.

Before building a house, you need to determine the needs of you and your family to determine the appropriate construction area, how many rooms, how many floors to avoid waste. Areas that do not need to be built can be used as front yards, skylights, and miniature landscapes. The cost of building a house will be greatly reduced.

Pay attention during rough construction.

Raw construction materials should not lose quality because it will directly affect the house. Therefore, there are two ways to save money during the rough construction process: building the foundation and choosing the roof. Choosing a strip foundation calculated at 50% of the area will save costs compared to pile foundations because when implementing pile foundations, it is necessary to press reinforced concrete piles, this cost is calculated separately from foundation construction, so the cost Pile foundations will be much higher, strip foundations and raft foundations are the most expensive types.

Constructing a corrugated iron roof on 30% of the area instead of a 50% reinforced concrete roof and a tiled roof on 70% of the area will greatly reduce costs when building a townhouse. However, a corrugated iron roof will definitely not be as durable as a reinforced concrete roof.

Select finishing materials.

Finishing materials greatly affect the cost of building a house, but to save costs we should not choose cheap materials of unclear origin, but we should choose materials scientifically..

• The water-based paint that should be used is maxilite paint instead of dulux and joton paint. These two types of paint are nearly twice as expensive because they have more colors than maxilie paint, but the quality is not much better.
  
• Close the plasterboard ceiling with a simple recessed frame to limit leveling.
  
• Reduce the number of unnecessary windows, use tungshin aluminum doors instead of xingfa aluminum doors or natural wooden doors.
  
• It is recommended to use tile floors instead of wooden floors. Using mostly ceramic tiles is relatively cheap.
  
• Limit stone facade cladding. You should paint with less decorative paint such as louvers and conwood roof fringes.
  
• You should only cover about 10cm of wall wool in the basic package. If the cladding is higher, the cost will increase accordingly.
  
• Use iron railings and iron handrails instead of using glass railings and wooden handrails. Iron boxes are also very delicate and durable over time.
  
• You should use a hanging lavatory instead of a lavabo with a stone base.
  
• There are two types of cold water tanks: lying and standing cold water tanks, so choosing the standing type will be cheaper.

Choose a reputable construction contractor

Choose a townhouse construction contractor that provides services that suit your needs at the most optimal cost, a reputable contractor, with transparency about construction costs, construction materials, and construction time. rough house construction.

A detailed home price quote for each item of work with type of materials, unit price of materials and labor does not incur costs during the construction process if the investor does not change the design. This is a cost-effective way to construct townhouses. Furthermore, if you meet a caring contractor like Nhan Dat Construction, if the investor cannot pay for that work item without spending too much money, Nhan Dat Construction will support the investor for free. fee. Because with Nhan Dat Construction, profit is not everything.

Currently, there are many construction contractors providing construction packages for townhouses at competitive costs, however, you must choose the construction contractor carefully because the contractor is the unit in charge of the construction process. , a step that makes the house quality.

Take advantage of available labor resources

For construction workers, you can use contractors’ workers, but for tasks such as cleaning the house and installing furniture, you should take advantage of available workers such as family members, friends, etc.

Nhan Dat Construction Company specializes in providing economical house building services, you can also contact us for free consultation.